Roller Mop
O As shown in the picture, lift the Roller Mop Cover and pull out
he Roller Mop.
O Use the small cleaning tool provided to remove hair or debris
wrapped around the Roller Mop.
Rinse the Roller Mop surface with clean water and drain excess
ater.
O Reinstall the Roller Mop and press the Roller Mop Cover back
into place. Make sure there is no water or stains inside the Roller
Mop to avoid damaging the motor.
f) Important:
Do not rinse the roller motor
directly with water, as it may
cause damage to the motor
and the robot.
19
To Next Page
Loading...