Adding auditing
120 Adaptive Server Enterprise
Logical name Physical name Segment name Table
name Size
6. Audit_01' /secret1/sybase_ dr/install/aud1.dat’ sysaudits_01 5
7. Audit_02' /secret1/sybase_ dr/install/aud2.dat' sysaudits_02 5
8. auditlog /secret1/.../auditlog.dat logsegment syslogs 2
7 When you are ready to execute the audit configuration, press Ctrl+A.
auditinit returns you to the Sybase Server Configuration screen.
8 Press Ctrl+A again.
auditinit prompts with:
Execute the Sybase Server Configuration now?
9 Enter “y” (yes).
auditinit executes the tasks to install auditing. When the installation
completes successfully, the following messages are displayed:
Running task: install auditing capabilities.
....................Done
Auditing capability installed.
Task succeeded: install auditing capabilities.
Configuration completed successfully.
Press <return> to continue.
Enabling auditing
After auditing is installed, no auditing occurs until a System Security Officer
enables auditing with
sp_configure. For more information, see the System
Administration Guide.
v Deleting a device entry
1 Select Delete a Device Entry from the Configure Auditing menu.
2 Enter the number of the device to delete.
3 Press return.
v Changing a device entry
1 Select Change a Device Entry from the Configure Auditing menu.
2 Enter the number of the device to change.
auditinit displays the Add/Change a New Device for Auditing menu with
information on the device you selected:
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device name:
/secret1/sybase_dr/install/audlog
2. Logical name of the device: aud.log
To Next Page
Loading...