Sym Citycom 300i - Front Fender

13. Body Cover
13-11
Front Fender
Remove front fender B
Loosen each side 2 bolts from front fender B.
.
Remove the front fender B.
Installation
Install in reverse order of removal procedures.
Remove front fender A
Loosen 3 bolts from the front fender above the
inside
Loosen 2 screws from the front fender above the
inside
Remove the front fender A.
Installation
Install in reverse order of removal procedures.
E
ach side 2
bolt
2
To this chapter contents