2. Maintenance Information
2-9
Steering Mechanism
Caution
Check all the wires and cables if they are
interfered during the rotation of the steering
handlebar.
Make the front wheel be spaced from the ground.
Turn the handlebar from right to left and check if it
is turned smoothly.
If the handlebar turns unevenly, bent, or can be
moved vertically, then adjust the top steering
bearing.
Suspension System
Caution
Do not ride the motorcycle with poor cushion.
Loose, worn or damaged cushion will make
poor stability and steering.
Front suspension
Press the front suspension for several times to
check its operational condition.
Replace parts if damage is found.
Tighten all nuts and bolts.
Rear Cushion
Press the rear cushion for several times to check
its operational condition.
Replace parts if damage is found.
Park the motorcycle by main stand and make the
rear wheel be spaced from the ground.
Start the engine and speed up gradually.
Replace the rubber bushing if looseness found.
Tighten all nuts and bolts.
To this chapter contents
To Next Page
Loading...
