EasyManua.ls Logo

Sym Citycom 300i - Page 85

Sym Citycom 300i
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Fuel Injection System
4-39
Remove fuel pump/fuel unit
Remove side cover.
Remove rear carrier
Remove rear bodycover.
Remove floor panel.
Remove under cover.
(refer to chapter 14)
Remove fuel pump lines coupler.
Release the fuel tube folder, removed the fuel tube.
Remove the fuel tank fixed bolts (Bolt Ž 3), remove the
fuel tank.
Remove / Install fuel pump and fuel unit
Remove fuel pump fixed bolts (Bolt Ž 6), remove fuel
pump.
Install In the anti-demolition order.
Cautions
Then remove fuel pump, fuel in fuel tank
internal to confirm not excessive.
Then install fuel pump and fuel unit, attention
direction.
Confirm whether the fuel filter dirt,
obstructive.
Fuel pump installation, to confirm whether it
is normal to the fuel out (the pressure about 3
kg/cm2).
Bolt Ž 3
Pressure Regulating Valve
Fuel filter
Fuel pump coupler
To this chapter contents

Table of Contents

Other manuals for Sym Citycom 300i

Related product manuals