14. STEERING/FRONT WHEEL/FRONT SHOCK ABSORBER SYM
14-8
Align the flange part on the speedometer
gear with the slot of wheel hub, and then
install the brake disc (drum brake) or
speedometer gear box.
Caution
Place the front wheel between the front
shock absorbers.
Drum Brake
Align the brake panel slot with the stopper of
the shock absorber.
Disc Brake
Align the flange part on the speedometer
gear with the slot of shock absorber stopper.
Disc Brake
Install the front wheel axle from right shock
absorber side.
Install the wheel axle nut, and tighten it to
specified torque value.
Torque value: 11.0~13.0kgf-m
Connect the speedometer cable to the
speedometer gear box.
Drum Brake
Install the front wheel axle from right shock
absorber side.
Install the wheel axle nut, and tighten it to
specified torque value.
Torque value: 5.0~7.0kgf-m
Connect the speedometer cable and brake
cable to the brake panel.
Contaminated brake lining will reduce
brake performance so the brake lining,
brake drum and disc must be free of
grease.
Stoppe
To Next Page
Loading...
