12. Crankshaft / Crankcase
12-8
Install the new oil seal.
Apply a layer of grease on the lip of oil seal.
Clean the crankshaft with clean solvent.
Special tool:
Oil seal driver (25*40*8)
SYM-9121600
Install the oil seal in the left crankcase with care
not to damage the lip of the oil seal.
Install the tensioner and tighten the bolts.
Torque value: 1.2 ~1.6 kgf-m
Install the cam chain.
Oil seal
driver
Cam chain
Tensioner
To this chapter contents
To Next Page
Loading...
