18. Electrical System
18-9
Ignition System
Ignition system circuit
Ignition coil inspection
Remove the luggage box.
Disconnect the ignition coil and the spark plug
cap.
Measure the resistance between the terminals
of the primary winding.
Standard resistance：0.63±0.03Ω(23ºC)
CPS inspection
Remove the right body side cover.
Disconnect the CPS coupler and measure the
resistance between G/W and L/Y wire
terminals.
Standard resistance：120±10%Ω
Caution
● Coil doesn’t need to be removed before
performing the inspection.
To this chapter contents
AC. generator
B/W
L/Y
Ignition
coil
L/Y
G/W
B
R
R
R/Y
G
Main switch
Fuse 20A
Fuse15A
Battery
R Red
BBlack
GGreen
WWhite
L Blue
Y Yellow
Engine start
control switch
Spark
plug
CPS
ECU
R/Y
To Next Page
Loading...
