Need help?Do you have a question about the Symantec 16-00-00091 - FNC XGRD FW VPN 200 and is the answer not in the manual?
Details about Stateful Inspection protection against hackers and its compatibility with enterprise firewalls.
Covers LAN setup, DHCP server, PPPoE support, NAT, PAT, and multiport switch capabilities.
Explains secure tunneling for remote access, gateway-to-gateway, and client-to-gateway VPNs.
Covers load balancing across WAN ports and automatic dial-up backup functionality.
Details features specific to Symantec Firewall/VPN 100, 200, and 200R models.
Introduces the web-based interface for device configuration and management.
Lists necessary hardware, software, and network connections for installation.
Provides essential safety precautions and warnings for handling and installing the device.
Details the different types of internet connections (PPPoE, Dynamic IP, Static IP) and required info.
Guides on physically connecting the device and setting up the computer's network settings.
Introduces the web-based interface for device configuration and management.
Guides through the main setup screen for initial internet connection and WAN port settings.
Covers DHCP, PPPoE, Static IP, and DNS configurations for network connectivity.
Covers viewing device status, LAN IP/DHCP management, and password configuration.
Provides advanced options for PPPoE connection setup and management.
Explains how to configure Dynamic DNS for remote access using domain names.
Guides on setting up static routes and understanding routing table entries.
Covers assigning static IPs, defining access groups, and configuring access filters.
Explains how to configure firewall rules for special applications and virtual servers.
Covers DMZ setup for direct host access and advanced expert-level configuration options.
Step-by-step guide to setting up VPN tunnels using static keys for secure communication.
Instructions for configuring VPN tunnels using dynamic keys with IKE for automatic key exchange.
Details how to identify, enable, and manage VPN client users and pre-shared keys.
Guides on backup/ISDN connections, serial console access for setup and reset.
Covers procedures for manually resetting the device and backing up its configuration.
Details how to view system logs and configure log forwarding parameters.
Steps to configure static tunnels between Symantec Firewall/VPN and SEVPN.
Steps to configure dynamic tunnels between Symantec Firewall/VPN and SEVPN using IKE.
Guides on setting up the VPN client and its security gateways.
Steps to establish a dynamic tunnel from the Firewall/VPN 200R to the VPN Client.
Instructions for downloading and applying firmware updates to the device.
To Next Page
General