ES3000 Ethernet Switch - Quick Install Guide
4
Warnings
• Only trained and qualified personnel are allowed to install this equipment.
• Remove any jewelry (rings, watches, necklaces, etc.) while installing this equipment.
• Install this equipment in racks with appropriate dimensions and weight allowances. Verify
racks are anchored and do not install in a way that can cause the equipment to tip and break.
Damage to the device or bodily injury can occur from equipment not appropriately mounted
and secured.
• Verify the unit and any device connected to it is properly wired and grounded.
• Attach only approved power cords to the device. Verify connecting power circuits have
appropriate overload protection.
• Verify the power connector is accessible at all times during the operation of the equipment.
• Do not work with equipment power circuits in dimly lit spaces.
• Do not install this equipment or work with its power circuits during thunderstorms or
weather conditions where power surges can exist.
• Verify adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.
• For plugable equipment, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
To Next Page
Loading...
Need help?
General
