TMSL 097-44018-26 Issue 2: Sep 99
Page 88
COMMAND CODE: RTRV-COM-CONN
PURPOSE
RETRIEVE COMMUNICATION CONNECTION
This command displays the connection status of the shelf.
INPUT FORMAT
RTRV-COM-CONN:[<tid>]:<aid>:<ctag>;
aid = SHELF
RESPONSE FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"<aid>" ...
/*
COM-1=<value>[,ACT-USER=<uid>],
COM-2=<value>[,ACT-USER=<uid>],
COM-3=<value>[,ACT-USER=<uid>]
*/
value = status of communication port (ACTIVE or INACTIVE)
uid = the user id (as set by the ENT-USER-SECU command) of the user
logged onto the port
Notes:
1. The “,ACT-USER= <uid>” part of the response appears only if the communication port is active and
security is enabled by section 4 of switch SW1 on the MIS card.
2. A status of INACTIVE (even if the port is active) will be reported for any communication port that is
using a 3-wire connection or has been set for a comtype of TERM1 with the ED-COM command.
To Next Page
Loading...
Need help?
General
