Need help?Do you have a question about the Syng Cell Alpha and is the answer not in the manual?
General| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
|---|---|
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| USB connectivity | Yes |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| USB connector type | USB Type-C |
| Connectivity technology | Wired & Wireless |
| Speaker type | Full range |
| Number of drivers | 3 |
| Speaker placement | Stand-mountable |
| Audio output channels | - channels |
| Number of woofer drivers | 2 |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50-60 Hz |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| Product color | Black |
| Recommended usage | Home |
| Frequency range | 30 - 20000 Hz |
| RMS rated power | - W |
Weight and Dimensions| Height | 304 mm |
|---|---|
| Weight | 5800 g |
| Diameter | 300 mm |
| Height (with stand) | 1230 mm |
Power and USB-C ports are on the end of the stem for concealed connection through the stand. For quick access use the USB-C port on the side of the stem.
Control the volume by moving the control ring upwards.
Control the volume by moving the control ring downwards.
Control playback by interacting with the control ring.
Route power and optional Syng Link cables through the base and tubes.
Attach the tubes securely to the Cell Alpha unit.
Securely attach the base to the assembled structure.
Keep protective wrap on during assembly and stabilize in shipping cradle.
Connect the power and/or Syng Link cables to the Cell Alpha unit.
To Next Page
