System Build 7467056COM - Assembly Steps: Finishing and Safety; Wall Anchoring Options

11
systembuild.com
STEP
5
Tube
You
* raw edges are shaded
(x1)
#A84050
stud
wallboard
hole
Stand the unit upright and place against the wall.
Fasten the wall anchor to the wall using option 1 or 2.
Option 1: Securely screw into solid area of the wall as
shown.
Option 2: Drill a 3/16" diameter hole (5mm) in the
wallboard.
Tap the wall anchor into the hole until it is flush.
Fasten the wall bracket to the wall anchor with the screw.
option 2
option 1