System Cleaners MS1-10 - Model Specifications

Version 1 (03.2020. EN) (MS1-10, MSC1-10)
Page 14 of 71
TECHNICAL SPECIFICATIONS
Installation
MS1-10
MS1-10
MSC1-10
Ambient temperature
Pump
3-40°C / 37-104°F
Pump type
Pump motor power
CRN 3-8
CRNE 3-8
Compressor motor power
1.1 kW / 1.5 HP
Connections
-
-
1 kW / 1.3 HP
Inlet air
Inlet water
1/4” NPT
Ø8
-
Outlet
3/4” NPT
3/4” BSP
3/4” BSP
Water, inlet
SC coupling
Pressure
Temperature
1.5–4 bar / 22-58 psi
Minimum recommended flow
3-70°C / 37-160°F
Water, outlet
75 liter/min / 19.8 USgal/min
Maximum flow at 10 bar (145 psi)
(including 4.0 bar (58 psi) inlet
pressure)
Air, inlet
50 liter/min / 13 USgal/min
Pressure
Minimum flow
5-10 bar / 72-145 psi
-
Electrical
150 liter/min / 5.3 cfm
-
Voltage and frequency
Current
1x120 V/60 Hz
1x230 V/50 Hz
Recommended pre-fusing
16.8-14.6 A
6.7-5.6 A
Recommended cable cross section
20 A
10 A
Chemical
3x1.5 mm² / 3xAWG16
Dosing range
Dimensions
0.2–6%*
Weight
Installation
50 kg / 110 lbs
60 kg / 132 lbs