SystemAir Villavent Combini EC - Equipment List

_________________________________________________________________________________________________________
Combini EC Installation description
206803 (02-12-2009) 14 Systemair AB
Equipment list
Ventilation unit type Combini EC
Cooker hood type TSL-1 EC
Controller 3-step speed regulator
El.extension cab
les
(3, 6 or 9 m) with plugs for
quick connection. Only for connection of Combini EC
to cooker hood type TSL-1 EC
Wall grill, Ø125 mm for outdoor air intake/stale air exhaust.
Spiro ducting, Ø125 mm (Ø100 mm branch duct).
Insulation stocking
30 or 60mm insulation, Ø125 (Ø100) mm
diameter. Glava insulation
with plastic diffusion barrier.
Alu. ducting Ø125 (Ø100) mm.
Lengths 1m and 3m.
Duct connectors (male) with or without rubber
seal, Ø125 (Ø100) mm.
Duct connectors (female), and Ø125 (Ø100) mm.
Tee-pieces, Ø125/125 (125 /100) mm
Bend 45
o
and 90
o
, Ø125 (Ø100) mm.
Reducers Ø125/100 mm.
Bungs, Ø125 (Ø100) mm.
Villavent extract louvers with frames, Ø125 (Ø100) mm.
Villavent inlet diffusers for ceiling or wall
installation, with
frame, Ø125 (Ø100) mm.
Installation material
, i.e. tape, screws for Spiro
duct, hose clips and installation instructions.