89676 06-07-2011 Page 14 of 17
Product: ELECTRIC WINCH
9000lb 9500lb 12000lb
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
9500lb FEATURES & SPECIFICATIONS
Single line rated pull 9500lbs (4309kg) single-line
Motor 5.5hp/4.0kw, Series Wound
Control Remote switch, 12ft (3.7m) lead
Gear Train 3 Stage Planetary
Gear Reduction Ratio
218:1
Clutch Sliding Ring Gear
Braking Action Automatic In-The-Drum
Drum Size Diameter 65mm Length 224mm
Cable 30m of 9.5mm diameter (Synthetic Rope)
Fairlead Hawse Fairlead
Remote Control Included
Battery Recommended: 650CC minimum for winching
Battery Leads 2 gauge, 1.9m
Finish Black Onyx
Weight NW 70.6lbs (32kg) / GW 77.2lbs (35kg)
Overall Dimensions (LxWxH) 21.9" x 6.3" x 8" (556 x 160 x 202mm)
Mounting Bolt Pattern
10.00±0.015" x 4.50±0.010" (254 x 114.3mm)
9500lb LINE SPEED & AMP DRAW (1st LAYER)
LINE LOAD
LBS/KGS
LINE SPEED
MOTOR
CURRENT
(CM) MPM FPM
0/0 756 7.56 24.8 71
2000/907 472 4.72 15.5 135
4000/1814 352 3.52 11.5 190
6000/2722 284 2.84 9.3 234
8000/3629 216 2.16 7.1 290
9500/4309 192 1.92 6.3 334
To Next Page
Loading...