T.J.M. 9000lb - Separate Gearbox from Drum; Remove Gearbox Foot Casting Screws; Position Gearbox Foot Casting

89676 06-07-2011 Page 7 of 17
Product: ELECTRIC WINCH
9000lb 9500lb 12000lb
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
2. Carefully remove the gearbox away from the
cable drum.
Diagram 2.
3. Unscrew all the 10 allen head cap screw holding
the gearbox foot casting to the gearbox housing.
Diagram 3.
4. Rotate the gearbox foot casting to the desired
position.
Diagram 4.