Insert/Remove the Nano SIM and microSD Card
1. Using ejector tool to open the SIM slot. 2. Insert/remove the SIM and microSD card.
Notes:
1. Your device only supports Nano SIM card (included). To avoid damage to your device,
do not attempt to insert any other SIM types.
2. The microSD Cards are sold separately.
Charging
Before first use, the battery should be charged completely.
1. Insert the USB Type C charging cable into the USB charger port.
2. Plug the charging head into the power outlet.
3. Remove charging cable from the charger port when charging is
complete.
Note: Please use the charging cable that came with the device. Using
other charging cables may damage the battery or cause other hazards.
Battery
Device back cover and battery are non-removable. Attempting to
remove either one it will invalidate the device warranty.
Power on your device
Long press the Power key until the device powers on. Unlock device screen by using
Swipe, PIN, Password or Pattern if necessary. After unlocking the device, the Home
screen will be displayed.
Power off your device
Long press the Power key until options popup and select Power off.
To Next Page
Loading...
General