• Do not paint the device.
• Do not drop, throw, or subject the device to other physical trauma.
• Stay Eco-friendly. Recycle the packaging of your device after installation.
• Consult with the facility on any questions regarding the use of this device on hospital grounds.
Road Safety
• Do not use the device or any mobile devices while operating a vehicle.
• Do not store or carry flammable or explosive materials in the same compartment as the device.
• Airbag deploys with extreme force. Do not place any objects in the area over the airbag or in the
airbag deployment area. If any item is improperly installed in the airbag deployment path while the
airbag is jettisoned, serious injury could result.
Third Party Equipment
The use of third-party equipment, cables or accessories, not made or authorized by KonnectONE, may
invalidate the warranty of the device and also adversely affect the device performance and stability.
Efficient Use
For optimum performance with minimum power consumption, do not cover the device with anything.
Covering the device may cause damage by operating at higher power levels than recommended.
California Proposition 65 Warning
The device includes batteries, circuit boards and other materials that can expose you to chemicals
including cobalt lithium nickel oxide, and nickel, which are known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
RF Exposure Information (SAR)
This device meets the FCC’s requirements for exposure to radio waves. This device is a Class B digital
device, pursuant to part 15 of the FCC Rules designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government.
Operation is subject to the following two conditions: (1) the device does not cause harmful interference,
and (2) this device accepts any interference received, including interference that may cause undesired
operation.
The FCC has granted an Equipment Authorization for this device with all reported Specific Absorption
Rate (“SAR”) levels evaluated in compliance with the FCC RF exposure guidelines. SAR information on
this device is on file with the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2APQU-MT-T800.
The highest SAR value for this device as reported to the FCC when tested for use in body is x.xx W/Kg
and x.xx W/Kg for extremity mode. While there may be differences between the SAR levels of various
devices at various positions, they all meet the government requirement.
To Next Page
Loading...
General