EasyManua.ls Logo

T-Rex ALBERTA - Controls Overview; Gain Knob; Level Knob; Tone Knob

T-Rex ALBERTA
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SPECIFICATIONS
Input Impedance@1KHz Higher than 1M Ohm
Output Impedance@1KHZ Lower than 1K Ohm
Power supply 9V DC (T-Rex FuelTank)
Minimum Power supply Voltage 8,5V DC
Maximum Power supply Voltage 12,5V DC
Current Draw @ 9V DC 7 mA
Maximum Input signal Vp/p 3,2Vp/p
Battery Type 9 V battery 6F22
Battery Life 12 to 16 Hour
External connectors Input Jack, Output Jack, 9V DC Jack
Controls On/Off, Level, Gain, Tone
Pedal size incl. knobs (W x H x D) 100 x 55 x 120 mm / 3,9 x 2,2 x 4,7 inch
Weight
(excl. battery and packaging) 0,345 kg / 12,2 oz
CONTROLS
Alberta’s controls are plain minimalistic, with just 3 knobs - GAIN, LEVEL
and TONE.
The GAIN knob controls the distortion amount.
The LEVEL knob sets the overall volume.
The TONE knob affects the top end (edge) of your signal without com-
promising sonic quality, allowing you to dial in the perfect tonal flavour
for you taste.