14
15
ENGLISH
ENGLISH
HOW TO USE YOUR
T3 AFAR
5
1
Attach the concentrator to
dry hair evenly with a wide
volume of air.
2
Select desired speed and
heat levels. Fine and processed hair
types should use the low heat setting.
Note: Circle indicator on each side of the
switches indicates the selected setting.
3
Aiming the concentrator in a
downward direction, rough dry
hair until it is 80% dry.
Finish by pressing the Lock-in Cool
Shot Button and applying cool air to
your hair to set your style.
4
Divide hair into 7 - 10 cm sections.
Applying tension with a round bristle
brush, brush through each section while
following with the dryer. To smooth the
ends, slip the brush underneath the
curve and blow over the curve.
Concentrator
Lock-in Cool
Shot Button
Power, heat and
speed switches
LOCKIN COOL SHOT BUTTON
The Lock-in Cool Shot Button provides a burst of cool air to help
set your style and seal in shine for a lasting finish.
To activate the cool shot, press and release the Lock-in Cool Shot
Button once. To deactivate it, press the button again.
Note: The Lock-in Cool Shot Button may remain activated after
turning off the tool. If air is cool on next use, press and release
the Lock-in Cool Shot Button once to deactivate it.
OPERATING INSTRUCTIONS
T3 AFAR
To Next Page
Loading...
Need help?
General
