Need help?Do you have a question about the TA DISCOVERY DSC250 and is the answer not in the manual?
General safety information and instrument symbols.
Safety precautions regarding electrical connections and maintenance.
Precautions for working with liquid nitrogen cooling systems.
Warnings about hot and cold surfaces of the DSC cell.
Safety guidelines for using gases and samples with the DSC.
Safety advice for lifting and moving the instrument.
Explanation of the DSC cell module and its function.
Procedure for powering on the DSC system.
Procedure for safely powering down the instrument.
Importance and types of calibration for accurate results.
Procedure for baseline slope and offset calibration.
Two-experiment calibration for sensor thermal capacitance and resistance.
Calibration using a reference material's melting transition.
Calibrating temperature using reference materials.
Optimizing heat capacity accuracy using a sapphire standard.
Calibrating MDSC heat capacity for accuracy.
How to start a DSC experiment.
How to stop a running DSC experiment.
Customer responsibility for instrument maintenance.
Procedure for replacing customer-replaceable fuses.
General| Temperature Range | -180 °C to 725 °C |
|---|---|
| Modulated DSC Capability | Yes |
| Atmosphere | Inert, Oxidizing, Reducing, Static, Dynamic |
| Sample Pan Type | platinum |
| Cooling System | Intracooler |
To Next Page