To Next PageTo Next Page
Need help?Do you have a question about the Tabuchi Electric THD-S55P3B-US and is the answer not in the manual?
General| Brand | Tabuchi Electric |
|---|---|
| Model | THD-S55P3B-US |
| Category | Inverter |
| Language | English |
General warnings and prohibitions for safe operation and handling of the inverter.
Precautions regarding the placement and environment of the inverter unit.
Cuts power demand during specific time slots by discharging the battery.
Minimizes peak electricity use by charging at night and discharging during the day.
Minimizes purchased electricity by utilizing PV power during day, evening, and night.
Keeps batteries charged for power outage protection; system goes on standby.
Identifies and describes the various parts of the hybrid solar inverter unit.
Details the display, operating buttons, and LED indicators of the remote controller.
Instructions for setting the grid-tied breaker before initial operation.
Steps for checking the operating status and starting the inverter.
Describes how the inverter operates with storage batteries during different times of day.
Explains inverter response to voltage or temperature variations affecting output.
Details inverter behavior during commercial power grid outages and restoration.
Guidance on resolving equipment failures and error messages.
Warnings and guidelines for connecting appliances during a power outage.
Steps for the inverter to switch to and begin stand-alone operation.
Process of returning to grid-tied operation after power is restored.
How the inverter manages power supply during a continuous outage.
Procedure to stop the inverter using the RUN/STOP button on the remote controller.
Steps for a complete system shutdown, involving internal switches.
Procedure to configure the system's date and time settings via the remote controller.
Adjusting display brightness and automatic screen turn-off timing.
Setting the date from which the system starts generating power data.
Setting a target for energy consumption to assist with savings.
Selecting and configuring different operational modes for the inverter.
Configuring the local time zone and Daylight Saving Time (DST).
Overview of steps required to establish an internet connection for the remote controller.
Steps for automatic network setup using DHCP for internet connectivity.
Steps for manual network setup when DHCP is disabled.
How to test the internet connection after configuration.
Displays historical data on power generated and consumed by the system.
Displays records of electricity sold to or bought from the power company.
Shows total generated, consumed, sold, and bought power since system start.
Procedure to set a target for energy consumption to aid savings.
Displays records related to energy saving targets and actual consumption.
How to interpret error messages displayed on the remote controller.
A table correlating error messages with their respective error codes.
Weekly checks to prevent equipment issues and identify potential problems.
Monthly checks for safe and long-lasting product use.
Recommended schedule for periodic checks and inverter replacement.
Instructions for cleaning the inverter and remote controller.
Detailed technical data for solar input, grid input/output, and stand-alone output.
