To Next PageTo Next Page
Need help?Do you have a question about the TAG MCLAREN AUDIO AVANTGARDE T32R SL and is the answer not in the manual?
General| Frequency Range (FM) | 87.5 - 108 MHz |
|---|---|
| Frequency Range (AM) | 522 - 1611 kHz |
| Signal-to-Noise Ratio (AM) | 50 dB |
| Total Harmonic Distortion (AM) | 0.5% |
| Output Level | 775 mV |
| Type | Tuner |
| Total Harmonic Distortion (FM) | 0.15% (mono), 0.3% (stereo) |
| FM Sensitivity | 1.0 µV (mono), 20 µV (stereo) |
| Sensitivity (AM) | 30 µV |
Instructions for installing batteries and operating the remote control.
Select FM, MW, LW, or DAB bands for tuning.
Use the tuning knob to fine-tune stations.
Enter station frequencies directly via the remote control.
Understand FM tuning and signal strength indicators.
Save favourite stations and their settings.
Retrieve stored stations from memory using various methods.
Adjust IF bandwidth for optimal signal quality.
Switch between mono/stereo and manage inter-station muting.
Features to prevent unequal display aging and manage brightness.
Control audio muting and select tuner inputs.
Display RDS information and cycle through data options.
Utilize EON for automatic station switching and programme type search.
Use the traffic key to toggle the traffic info symbol.
Program the tuner to wake up from standby at a set time.
Deactivate, reactivate, and personalize alarm settings.
Set a timer for the unit to automatically go into standby.
Access and navigate the T32R's menu system for customization.
Configure display appearance and standby brightness.
Manage stored stations and system parameters like auto-tune.
Set the local time automatically from RDS/DAB or manually.
Control other units, synchronize displays and standby via the TAGtronic Bus.
Transmit FM/DAB radiotext to an AV processor for TV display.
Connect a dedicated, high-performance outdoor FM antenna.
Assemble the supplied loop antenna for AM reception.
Connect a high-performance outdoor DAB antenna for reception.
Connect to preamplifiers or digital equipment.
Access DAB data stream via optical connector for external equipment.
Use a 400Hz tone to set recording levels on external equipment.
Understand performance improvement during initial use.
Procedure for safely changing the unit's fuse.
Information on servicing, warranty, and contacting service agents.
Frequency ranges, abbreviations, and tuning specifications.
Ultimate signal to noise ratio and selectivity values.
Deviation, calibration, and de-emphasis details.
Frequency range, modes, and data converter for DAB.
Calibration frequency, audio output impedance, and output levels.
Digital output impedance, level, and operating temperature.
