EasyManua.ls Logo

TaiDoc TD-4283 - User Manual

Default Icon
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TD‐4283
BLOODGLUCOSE
MONITORINGSYSTEM
OWNER’SManual
Version1.0
2012‐02

Table of Contents

Questions and Answers

  • D
    David BurnettAug 3, 2025
    What to do if TaiDoc Blood Glucose Meter control solution testing result is out of range?
    • V
      vrosarioAug 3, 2025
      If the control solution testing result is out of range for your TaiDoc Blood Glucose Meter, consider these possibilities: 1. Review the instructions and carefully repeat the test. 2. Vigorously shake the control solution vial before retesting. 3. Verify that the control solution hasn't expired or become contaminated. 4. Ensure the control solution, meter, and test strips are at room temperature (20°-25°C/68°-77°F). 5. Try a new test strip. If problems persist, the meter may be malfunctioning.
  • K
    Kimberly OwenAug 12, 2025
    What to do if TaiDoc TD-4283 test does not start after applying the sample?
    • A
      Ashley MorganAug 12, 2025
      If the TaiDoc Blood Glucose Meter doesn't start after applying the sample, it might be due to several reasons. First, ensure you are using enough blood; try the test again with a new strip and a larger sample. A defective test strip could also be the cause, so try a new one. Make sure to apply the sample while the display is flashing, as the meter switches off automatically after 2 minutes of inactivity. If none of these steps work, the meter itself may be defective.
  • B
    Brian AndersonAug 23, 2025
    Why does my TaiDoc TD-4283 not display anything after inserting a test strip?
    • J
      John DavisAug 23, 2025
      If your TaiDoc Blood Glucose Meter displays nothing after inserting a test strip, the first thing you should check is the battery. Recharge it if it's exhausted. Also, make sure you've inserted the test strip correctly, with the contact bars facing up and fully inserted. If the issue persists, it could indicate a problem with the meter or the test strips themselves.

Summary

IMPORTANT SAFETY PRECAUTIONS

BEFORE YOU BEGIN

Important Information

Key details and general advice before using the system.

Intended Use

Specifies the system's purpose and target users.

Test Principle

Explains how the glucose measurement technology works.

Meter Overview

Display Screen

Details on the meter's display elements and symbols.

Test Strip

Information about the glucose test strip and its components.

Setting the Meter

Setting Date, Time, and Format

Instructions for configuring the meter's date, time, and format.

Managing Memory and Alarms

How to clear stored data and set up reminder alarms.

THE FOUR MEASURING MODES

Control Solution Testing

When to Perform Control Tests

Guidelines on when a control solution test is necessary.

Performing a Control Solution Test

Step-by-step guide for conducting a control solution test.

Out-Of-Range Results

Actions to take if control test results are outside the expected range.

TESTING WITH BLOOD SAMPLE

Preparing the Puncture Site

Instructions for preparing the skin before taking a blood sample.

Fingertip and Alternative Site Testing

Procedures for obtaining blood samples from fingertips and alternative sites.

Performing a Blood Glucose Test

Comprehensive steps for conducting a blood glucose measurement.

METER MEMORY

Reviewing Test Results

How to access and view stored blood glucose readings.

Reviewing Day Average Results

Accessing and understanding average glucose levels over different periods.

Downloading Results onto a Computer

Data Transmission Via Bluetooth

Steps for transferring test data to a computer using Bluetooth.

MAINTENANCE

Battery Management

Information on battery recharge and low battery indicators.

Caring for Meter and Test Strips

Guidelines for cleaning, storing the meter, and handling test strips.

Important Control Solution Information

Key details for using control solutions correctly.

SYSTEM TROUBLESHOOTING

Result Readings

Interpretation of different meter display readings.

Error Messages

Explanation of error codes and recommended actions.

Troubleshooting Common Issues

Solutions for common problems encountered during testing.

DETAILED INFORMATION

SYMBOL INFORMATION

SPECIFICATIONS

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

TaiDoc TD-4283 Specifications

General IconGeneral
ModelTD-4283
CategoryBlood Glucose Meter
Measurement Range20-600 mg/dL
Measuring Time5 seconds
Power Source2 x AAA batteries
Operating Temperature10-40 °C
Operating Humidity10-90% RH
DisplayLCD
Sample TypeCapillary whole blood
Sample Volume0.5 µL

Related product manuals