Takara Belmont Roller Ball AK-S23A User Manual (English)

Questions and Answers:

B
Brandi RobertsAug 3, 2025
What to do if the Takara Belmont Hair Dryer error illuminates?
- C
  Christina RhodesAug 3, 2025
  If the error code appears continuously even with the customer’s head in the correct position, turn off the power and contact your nearest Takara Belmont dealer directly. Also, ensure that the product is positioned so that the ring does not contact the wall or other equipment; turn the power off and then on again. If setting the product in the correct position and turning the power on doesn't fix the issue, turn off the power and contact your dealer directly.
J
jenna51Aug 11, 2025
Why does my Takara Belmont Roller Ball AK-S23A have an odd smell?
- P
  Phyllis JonesAug 11, 2025
  An odd smell from the Takara Belmont Hair Dryer's heater could be due to dust, dirt, or chemicals adhering to the heater or reflector. This fouling can cause a transient fire and emit smoke. If the smoke stops when the fire burns out, it should cause no damage. However, if the fouling is substantial or the smoke doesn't stop, immediately turn off the power and contact your nearest Takara Belmont dealer directly.
M
martinezwilliamAug 17, 2025
What to do if my Takara Belmont Roller Ball AK-S23A Hair Dryer has no power?
- C
  Courtney SullivanAug 17, 2025
  If your Takara Belmont Hair Dryer has no power, ensure the power plug is firmly inserted into the wall outlet and that the power switch is turned ON. Also, check the fuse on the distribution panel or the breaker switch. If these steps don't resolve the issue, turn off the power switch and contact your nearest Takara Belmont dealer directly. If the issue persists, immediately stop using the product, turn off the power switch, disconnect the power plug, and then immediately contact your nearest Takara Belmont dealer directly.