III-10
MACHINE CONFIGURATIONDRIVE SYSTEM
DISASSEMBLY AND ASSEMBLY
Removing the Engine
1. Disconnect the negative battery cable from the
battery.
2. Remove the canopy.
“Removing the Canopy”
3. Remove the floor frame.
“Removing the Floor Frame”
4. Disconnect the electrical wiring from the air
cleaner. Next, remove the bracket (1) together
with the air cleaner.
5. Remove the radiator.
“Removing the Radiator”
6. Disconnect the coolant drain hose (2).
7. Remove the hydraulic pump.
“Removing the Hydraulic Pump”
8. Remove the valves (3) and the filter (4).
9. Remove the fuel inlet pipe (5).
10. Disconnect the fuel hoses (6).
11. Disconnect the battery cable (7) and all the con-
nections on the engine side of the electric wir-
ings (8).
• Attach identification labels to individual wir
-
ings.
• Disconnect the wirings from the clamp and
the band.
12. Disconnect the engine ground cable (9).
13. Remove the bracket (10) and accelerator wire
(11) from the engine.
14. Remove the bolts (12) and then the cushion rub-
bers.
Bolt: 256N·m; Apply thread-locking com-
pound.
15. Suspend the engine temporarily, and remove the
engine.
Engine: 340 kg
Installing the Engine
Follow the same procedure as for removal in the
reverse order.
T7C105
5
3
1
3
4
T7C106
6
11
2
6
10
8
T7C107
7
8
8
T7C108
9
12
12
To Next Page
Loading...
