Need help?Do you have a question about the Talmus PCX6400ME and is the answer not in the manual?
Expresses congratulations and provides a general overview of the TALMUS powered mixer's features and benefits.
Lists essential safety guidelines to prevent electrical shock, damage, and ensure safe operation of the appliance.
Details the built-in protection circuits for temperature, short circuits, and power on/off anti-thump.
Covers PAN for stereo imaging and LEVEL for output adjustment of each channel.
Manages signal routing to effect bus (EFX) and monitor bus (MON) for each channel.
Includes LOW, MID, HIGH EQ, PAD for attenuation, and LINE/MIC input connectors.
Details controls for the 16-mode, 128-program digital stereo signal processing (DSP) for effects.
Explains the L-Channel 7-band graphic equalizer for frequency response adjustment.
Describes the AMP-L PROTECT indicator for the Left Power Amp section's protection circuits.
Controls the final output level for the Left (L-MASTER) and Right (R-MASTER) master channels.
Includes LED VU METERS for output levels, METER MODE switch, and R-CHANNEL GRAPHIC EQUALIZER.
Covers controls for EFFECT RETURN, MASTER EFFECT, EFFECT SEND, AUX IN, TAPE IN, and MONITOR OUT.
Details POWER AMP MODE selection and MAIN MASTER level, plus status indicators like POWER LED.
Explains various input/output jacks including EFFECT SEND, RETURN, MONITOR OUT, AUX IN, TAPE IN/OUT, MIX OUT.
Describes the SPEAKER OUTPUT jacks for connecting speakers to POWER AMP CH 1 and CH 2.
Details specifications for SPEAKER OUTPUT jacks and minimum/maximum load requirements.
Covers the POWER ON/OFF SWITCH and provides stereo mode connection examples for speakers.
Provides instructions to contact a TALMUS distributor for service needs.
Warns against attempting self-service, which can be dangerous and void the warranty.
Illustrates the physical installation and connection of various audio devices to the mixer.
To Next Page
General