Operating the dryer
Preparing measures
Switch the power on using the safety switch.
Close the door pressing it gently.
Choosing the program and the temperature
Choose a program by pressing the selection button for the desired program. A green indicator will
light next to the button. Select one of the five available programs:
Starting the dryer
Start the machine by pressing the button.
The following lights indicate the functioning of the heater:
After the use
Leave the door open and the dryer clean for the next user.
Never put into the dryer textiles that have been cleaned with inflammable or toxic chemicals.
Do not leave dry laundry in the drum, as there is the danger of fire.
Do not clean the machine under running water.
Open the door and clean the filters. In all models there is a fluff
filter on the lower part of the door, and the filter can easily be
cleaned when the door is open. In TALPET CS 10 C and CS 10
LPU models there is a separate labelled filter for air condensing
and thermostat unit. For cleaning these filters must be removed by
lifting and pulling the filters. It is important to place the filters
properly before using the tumble-dryer. CS 10 LPU model does
not start up if the filter is not properly placed.
To Previous Page
Loading...