TAMBU 20210305 - Set-up; Setting up your tent

24
SETUP
Setting up your tent
- Make sure that the Tent is only assembled by a competent Adult.
- Do not pitch the tent on sloping ground.
- Assemble the product according to figures 1 to 6.
Figure 1:
1. Remove the tent and all accessories from the retail pack (J).
2. Lay the outer tent (A) flat and completely unfolded on the ground
where it is to be pitched. The openings for the poles (C) and (D)
must be on the outside of the tent.
3. Unfold the poles (C) and (D) and assembly the individual parts
together one at a time.
4. Carefully guide the poles (C) and (D) through the openings provi-
ded for them, as shown in figure 1. The longer poles (C) must be
guided through the middle openings, the shorter poles (D) through
the outer openings.
5. Attach each end loop to the ground with a peg (G).
Figure 2:
6. Attach the tent (A) to the poles (C) and (D) by using the clips
provided.
7. Lift the tent and guide the poles into the ring lets provided on the
ground. The frame is now set up and under tension. Beware of
over-tensioning. If the tension is too high, the tent may tear.
ENG
BARA 4 Person Family Tent | © Tambu Outdoor GmbH