Need help?Do you have a question about the Tamerica TCC 2700 and is the answer not in the manual?
Instructions for threading the upper laminating roll, involving threading bars.
Instructions for threading the lower laminating roll, involving support rods and threading bars.
Lever should be in the 'UP' position when the machine is not in use.
Lever should be in the 'DOWN' position when the machine is in use.
Adjusting tension to resolve wrinkles caused by improper resistance for laminating film rolls.
Using the reverse button to back out film in case of jams or lamination errors.
Removing excess glue buildup on rollers using non-abrasive cleaning solutions.
To Next Page
General