To Next PageTo Next Page
Need help?Do you have a question about the Tanaka TCP-210 and is the answer not in the manual?
General| Starting System | Recoil starter |
|---|---|
| Maximum Suction Lift | 8 m |
| Type | Centrifugal |
| Suction Port Diameter | 50 mm (2 in) |
| Discharge Port Diameter | 50 mm (2 in) |
| Maximum Pumping Capacity | 600 L/min |
| Engine | Tanaka |
| Engine Type | 2-stroke, air-cooled |
| Maximum Flow Rate | 600 L/min |
| Suction Inlet/Discharge Outlet Diameter | 50 mm (2 in) |
Critical safety measures including warnings, protective gear, and understanding all instructions before operation.
Identifies key components of the Tanaka pump models TCP-25 and TCP-381 using diagrams.
Safety measures before operating, covering personal protection and equipment checks.
Safe fuel handling, mixing, and storage to prevent hazards and engine damage.
Safety recommendations during pump operation, including ventilation and proper use.
Instructions for connecting hoses and using a strainer on the suction hose for pump protection.
Guidance on correct fuel mix and safe refueling practices for the pump unit.
Procedure for priming the pump and steps for safely starting the engine.
Instructions for operating the pump during use and how to safely shut down the engine.
Procedures for draining the water pump and cleaning/replacing the air filter.
Maintenance of the spark plug and muffler to ensure optimal engine performance and prevent issues.
Overview of recommended maintenance tasks by frequency: daily, weekly, monthly.
Routine checks and cleaning tasks for daily and weekly upkeep of the unit.
Monthly maintenance activities including fuel tank and carburetor cleaning for long-term care.
Detailed specifications for TCP-25/210 and TCP-381 models, covering engine and pump performance metrics.
Formal statement declaring product conformity with essential safety requirements and standards.
