Tanaka TPS-200 User Manual

Owner’Owner’
Owner’Owner’
Owner’
s Mans Man
s Mans Man
s Man
ualual
ualual
ual
Model Numbers:
TPS-200TPS-200
TPS-200TPS-200
TPS-200
POLE SAW APOLE SAW A
POLE SAW APOLE SAW A
POLE SAW A
TTTT
TTTT
TT
AA
AA
A
CHMENTCHMENT
CHMENTCHMENT
CHMENT
P/N 28577
Date 05-04-01
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4
th
Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212
www.tanakapowerequipment.com custsvc@tanaka-ism.com
TPS-200

Tanaka TPS-200 Specifications

General

Brand	Tanaka
Model	TPS-200
Category	Saw
Language	English

Summary

Introduction

SAFE OPERATION

Safety precautions and warnings for operating the pole saw attachment, including electrical hazards.

Assembly procedures

Installation of cutting attachment

Instructions for connecting the pole saw attachment to the brush cutter.

Installation of bar and chain

Steps for installing the guide bar and saw chain onto the pole saw attachment.

Chain oil

Information and instructions for filling and checking the chain oil reservoir.

ADJUSTMENT OF CHAIN OIL SUPPLY

How to adjust the rate of chain oil delivery for optimal lubrication.

Pruning techniques

Maintenance

Oiler port

Instructions for cleaning the chain oiler port for proper lubrication.

Guide bar

Procedure for cleaning the guide bar groove and oiler port before use.

Side case

Advice on keeping the side case and drive area clean of debris.

Angle transmission

Guidance on checking and refilling grease for the angle transmission.

Specifications