TANDBERG TCP 3015A - User Manual

Socket for connecting extra equipment, controlled by the power switch. Max 300W.

Connect to receiver/control amplifier DD, AUX, or TAPE inputs. Avoid PHONO.

Connect stereo headphones to the jack. Adjust volume with the Volume knob.

Error lights if disc is upside down, missing, dirty, or scratched.

How to choose a different track during playback or from stop mode.

Instructions for interrupting playback (Pause) and ending playback (Stop).

Error lights if searching before the start or after the end of the disc.

Step-by-step guide for programming tracks using the unit's buttons.

How to remove a specific track from the programmed sequence.

Instructions on how to clean discs properly without damaging them.

Notes on lubricating bearings and keeping the disc tray clean.

Information on fitting a rack mount kit for installation.

Instructions for attaching side panels using specific screws.

Socket for connecting extra equipment, controlled by the power switch. Max 300W.

Connect to receiver/control amplifier DD, AUX, or TAPE inputs. Avoid PHONO.

Connect stereo headphones to the jack. Adjust volume with the Volume knob.

Error lights if disc is upside down, missing, dirty, or scratched.

How to choose a different track during playback or from stop mode.

Instructions for interrupting playback (Pause) and ending playback (Stop).

Error lights if searching before the start or after the end of the disc.

Step-by-step guide for programming tracks using the unit's buttons.

How to remove a specific track from the programmed sequence.

Instructions on how to clean discs properly without damaging them.

Notes on lubricating bearings and keeping the disc tray clean.

Information on fitting a rack mount kit for installation.

Instructions for attaching side panels using specific screws.