• Telescopes to accurately measure vertical
jump from 4 to 12 feet
• Heavy duty base with wheels and 10 kg
weight allows for portability and stability
• Movable veins are placed at 1” increments
to allow for accurate jump measurement
• Highest vein reached remains angled al-
lowing accurate jump reading to be ob-
tained
• Reset pole quickly returns veins into posi-
tion for next use
• Can measure the height of individual,
standing arm reach, standing vertical, or
vertical jump with approach
• Ships in two boxes totaling 50 lbs
Assembly Instructions:
Align Part 1 with Part 2 and secure with 2 bolts and
washers. Align Part 3 with the 4 bolt openings on Part
1 and Part 2 and secure with 4 bolts and washers. Re-
move 2 pre-positioned screws near the top of Part 3
and align Part 4 screw openings (on curved end of
piece) with the newly exposed screw openings on Part
3. Reposition the 2 screws in the openings and tighten.
Position Part 5 in the round opening on Part 2 and se-
cure with bolt and washer. Place 10 kg weight on se-
cured weight rod. Use Allen wrench to tighten all bolts
before use.
Parts List:
Part 1 - Wheel component base bar
Part 2 - Weight component base bar
Part 3 - Telescoping Pole
Part 4 - Curved pole with movable measurement veins
Part 5 - Weight rod
10 kg weight
7 bolts and washers
Allen Wrench
Reset Pole
SUPPORTS • EQUIPMENT • TRAINING
440 Baxter Avenue • Louisville, KY 40204
800.766.1098 • TandemSport.com
Getting Started
To Previous Page
Loading...