Tandy CM-5 - Page 11

Care and Maintenance
• To prevent a fire or electrical shock, do not overload wall outlets and extension
cords.
• Adjust only those controls that are described in the "Adjusting the CM-5
Display" section. Improper adjustment of other controls can result in damage
that will require the services of a technician.
• Do not allow anything to rest on the power cord. The cord should not stretch
across a hall or any other high traffic area.
• Unplug the monitor from the AC outlet if it is to be idle during a weekend,
vacation, or other extended period of time.
• If the same characters or graphics are shown for a long time with the CON
TRAST and BRIGHTNESS controls set to maximum positions, part of the
screen may be damaged. Use these controls with care.
• To prevent electrical shock and other hazards, do not remove the back cover of
the monitor.
• Do not drop or push objects into the cabinet openings. Some internal parts
carry hazardous voltages and contact can result in electrical shock or fire.
• Never spill a liquid of any kind on the monitor. If liquid is accidentally spilled,
unplug the unit and have it checked by a Radio Shack service technician before
using.
Cleaning the CM-S
Always unplug the monitor before cleaning. Wipe the screen and cabinet with a soft
cloth. If the screen requires more than dusting, use a house-hold window cleaner
and a soft cloth.
Caution: Do not use benzene, thinner, or any volatile substances to clean the unit.
Such substances can permanently mar the finish. Never leave the unit in contact
with rubber or vinyl for an extended period.
Occasionally, the internal parts of the monitor may need to be cleaned to prevent
a fire or other damage caused by dust particles. It is recommended that you take
the unit to a Radio Shack Computer Center for a yearly cleaning.