CHANGING
OR
INSTATTING
NEW
CRYSTATS
Your
TRC-BB
comes
with
chonnel
I4
crystols,
instolled in chonnel
position
A.
While
you
con use ony
3
chonnels
of
the
40
ollowed
to the CB bond,
you
must
use crystols specificolly
designed
for your
unit.
To
obtoin
crystols,
order
through
your
locol
Tondy
store.
Be sure to specify
the
chonnel, Cotologue
Number of
this
Wolkie-Tolkie ond comolete
description.
Do not ottempt
to use non-
stondord crystols
or
to moke
ony
internol odiustmenls
to
your
unit.
Such
oction
is
prohibited
by
the
DOC
ond
moy result in illegol
operotion
-
for which
you
moy
be
lioble
ond
moy be fined.
l. To
remove the front cover, first
remove o
screw on
the
bock cover.
Then
remove o screw on
the inside
of
the bottery cover.
2. Insert the new
motched
ooir of
crystols
into their
sockets. Eoch
crystol
will be morked with the
chonnel
(l
-40),
tronsmit
or
receive
(T
or
R),
or
frequency.
Mcke sure the
tronsmit
(T)
ond
receive
(R)
crystols
ore
instolled in their
correct sockets.
You will find the
RX/TX ond chqnnel
designotors
for
eoch crystol on
the
shield
plote,
obove crystol sockei.
lf the crystols ore reversed, the unit
will tronsmit on one
frequency
ond
receiver on onother, both of
which
will be outside the
Citizens
Bond.
This
situotion
would be considered
illegol
operotion.
3.
Reploce
the
bock
cover.
)
)
Instolling
crystols.
6
ABC ABC
To Next Page
Loading...
Need help?
General