Why does 'Lo' appear on my Tanita InnerScan BC-506 Scales display?
If 'Lo' appears on the display, or all the data appears and immediately disappears, it means the batteries are low. Replace all the batteries at the same time with new ones immediately, as weak batteries can affect the accuracy of your measurements.
Why does 'Err' appear while measuring on my Tanita InnerScan BC-506 Scales?
If 'Err' appears while measuring, it could mean one of two things: the unit cannot accurately measure your weight because it detects movement, or your Body Fat Percentage is more than 75%. In the first case, stand on the platform keeping movement to a minimum. In the second case, the scales cannot provide a reading.
What to do if the body fat percentage reading doesn't appear on my Tanita InnerScan BC-506 Scales?
If the Body Fat Percentage reading does not appear after measuring your weight, make sure socks or stockings are removed. Also, ensure the soles of your feet are clean and properly aligned with the guides on the measuring platform.
How to fix communication error on Tanita InnerScan BC-506 Scales?
To fix a communication error on your Tanita Scales: 1. Check the Router settings. 2. Restart the Router. 3. Place the Router so that the Body Composition Monitor is nearby.
What does 'O-Ld' mean when it appears while measuring on my Tanita Scales?
If 'O-Ld' appears while measuring, it means the weight capacity has been exceeded. In this case, the scales cannot provide a reading.
How to complete Wi-Fi setup on Tanita Scales?
To complete the Wi-Fi setup on your Tanita Scales, set up the Router connection through WPS or manual settings from a PC.
What to do if I get a connection error in the server with my Tanita InnerScan BC-506?
If you encounter a connection error in the server, try connecting again after a while.
What to do if registration was not done in the server for Tanita InnerScan BC-506 Scales?
If registration was not done in the server, register your personal information at the website.
General| Type | Body Composition Monitor |
|---|---|
| Technology | Bioelectrical Impedance Analysis (BIA) |
| Weight Capacity | 150 kg |
| Body Fat Percentage | Yes |
| Body Water Percentage | Yes |
| Muscle Mass | Yes |
| Bone Mass | Yes |
| Visceral Fat Rating | Yes |
| Metabolic Age | Yes |
| Basal Metabolic Rate (BMR) | Yes |
| Recall | Yes |
| User Profiles | 4 |
| Display | LCD |
| Power Source | 4 x AA batteries |
| Weight Increment | 0.1 kg |
| Body Fat Percentage Range | 5% - 75% |
Guides the user through the process of installing batteries correctly.
Instructs users to register their device online for cloud services.
Details the correct placement of the scale for accurate measurements.
Provides essential advice for maintaining the device and ensuring its longevity.
Explains how to choose and activate a user profile before taking measurements.
Details how to interpret the various body composition metrics displayed on the screen.
Explains how to retrieve and view up to 10 previous measurement records.
Describes the automatic data upload process to eSmartHealth.com using Wi-Fi.
Highlights critical safety warnings, especially for users with medical implants or pregnant women.
Provides definitions, usage restrictions, and factors affecting measurement accuracy.
Offers detailed guidance on preparation and conditions needed for precise measurements.
Identifies key components like electrodes, display, and all control buttons on the device.
Describes the meaning of the Wi-Fi check lamp and other status indicators.
Details components on the back of the device and lists all included accessories.
Guides the initial step of registering the device on the eSmartHealth online portal.
Details how to connect the monitor to a Wi-Fi router using WPS or PC software.
Step-by-step guide to inputting the correct current date into the device.
Guides the user through setting the current hour and minute for accurate timekeeping.
Instructions for turning on the unit and selecting a personal data slot (1-4).
Option to enable or disable the automatic wireless upload of measurement data.
Guides the input of birthday, gender, and height for user profile creation.
To Next Page