Tannoy OCV 6 - Specifications

26
OCV Series OCV 8 / OCV 6 Quick Start Guide
27
Notes:
1. Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber
2 Unweighted pink noise input, measured at 1 metre in an anechoic chamber
Specications
OCV 8 OCV 6
Performance
Frequency Response (-3 dB)
(1)
75 Hz - 20 kHz 80 Hz - 20 kHz
Frequency Range (-10 dB)
(1)
60 Hz - 30 kHz
System Sensitivity (1 W @1 m)
(2)
90 dB 88 dB
Dispersion (-6 dB) 80 degrees conical 90 degrees conical
Transducers Coaxial
Low Frequency 200 mm (8.00") mineral loaded cone material 150 mm (6.00") mineral loaded cone material
High Frequency 25 mm (1.00") 20 mm (0.79)
Crossover 4.5 kHz - 3rd order LF, 2d order HF 5.4 kHz - 2nd order LF, 2nd order HF
Directivity (Q) 14.4 averaged 1 kHz to 6.3 kHz 11.3 averaged 1 kHz to 6.3 kHz
Directivity (DI) 11.6 dB averaged 1 kHz to 6.3 kHz 10.5 dB averaged 1 kHz to 6.3 kHz
Rated Maximum SPL
(2)
108 dB (average) 114 dB (peak) 105 dB (average) 111 dB (peak)
Power Handling
Average 70 W 60 W
Programme 140 W 120 W
Peak 280 W 240 W
Recommended Amplier Power 140 W @ 16 Ohms 120 W @ 16 Ohms
Nominal Impedance 16 Ohms
Construction
Enclosure ABS / Steel
Grille Steel, plated and powder coat painted
Connectors Euroblock type removable locking connector with screw terminals with “loop through” facility
Transformer setting Rotary switch
Safety Agency Ratings UL-1480, UL-2043, CE
Bezel diameter 302 mm (11.9") 260 mm (10.2")
Overall Length 493 mm (19.4") 423 mm (16.7")
Net Weight 8.2 kg (18.1 lbs) 5.8 kg (12.8 lbs)
Shipped weight 10.4 kg (22.9 lbs) 7.6 kg (16.7 lbs)
Transformer Taps
70 V 60 W / 30 W / 15 W / 7.5 W & low Impedance operation
100 V 60 W / 30 W / 15 W & low Impedance operation