Reveal 6
Passive nearfield reference monitor
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Shielded 165mm (6
1
/2”) woofer, multi fibre paper pulp cone
Shielded 25mm (1”) titanium dome neodymium tweeter
WideBand™
HF extended to 51kHz corrects phase response
The Reveal 6 combines all the heritage and purity of the original Reveal series
with the very latest in technology. The result is a no-nonsense nearfield
reference monitor with deep, punchy bass, clean and open mid-range
and unrivalled vocal intelligibility. Combine the Reveal 6 with your
preferred power amplifier and hear just how good a passive reference
monitor can sound.
Reveal 6
Frequency response
(1) 63Hz-51kHZ
Recommended Amplifier Power 50 to 100W @ 8W
Power Handling Average RMS 50W
Normal Impedance 6
Sensitivity (3) 90dB for 1W at 1m
Distortion <0.6%
Crossover Frequency 2.9kHz
Dispersion (@-6dB) 90 degrees
DRIVE UNITS
Drive Units - LF/MID 165mm (6
1
/2”) multi fibre
paper pulp cone
WideBand™ HF 25mm (1”) titanium dome
neodymium magnet system
Cabinet
Type Optimised bass-reflex loaded
Construction MDF cabinet and front baffle.
Tongue and groove front and back
Finish Grey cabinet
Maroon painted baffle
To Next Page
Loading...
Need help?
General