PERFORMANCE 66D
Frequency response
(1) 49Hz-51kHZ
Max SPL
(2) 117dB
Distortion <0.4%
Dispersion @-6dB, 10kHz, horizontal 90 degrees
DRIVE UNITS
Drive Units – LF/MID 2 x 165mm (6
1
/2”) multi fibre
paper pulp cone
WideBand
TM
HF 25mm (1”) titanium dome,
neodymium magnet system.
ELECTRONIC SYSTEM
Inputs 600
balanced XLR/Jack,
SPDIF RCA
SPDIF sampling rate 44.1 – 96kHz
Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu
for a max SPL of 117dB
Amplifier output power 100W LF / 50W HF
Outputs SPDIF slave out RCA
User Controls Front panel mounted
on/standby/mute switch,
multi-function LED,
Rear panel mounted trim +6/-12dB,
80Hz high pass switch for AV use,
16-way Activ-Assist
TM
switch array
Reveal 66D
Active centre channel reference
monitor with Active-Assist™
Optimised bass-reflex loaded
cabinet with 40mm thick front
baffle
Two shielded 165mm (6
1
/2”)
woofers, multi fibre paper
pulp cones
Shielded 25mm (1”) titanium
dome neodymium tweeter
WideBand
TM
HF extended to
51kHz corrects phase response
Active bi-amplification
(100W LF / 50W HF)
Putting together an active surround
system? Look no further than the
Reveal 66D as the ideal centre
channel monitor.
With its extended WideBand™
response, the R66D preserves the
harmonic structure of recorded music
and vocals; this results in a more
natural and accurate reproduction
of the original source. Ready to
integrate with your analogue or digital
production environment the R66D
includes Tannoy’s Activ-Assist™
equalisation technology.
To Next Page
Loading...
Need help?
General