EN
Package Contents
·1 x TaoTronics Wireless ANC Headphones (TT-BH047)
·1 x USB Charging Cable
·1 x 3.5mm Audio Cable
·1 x User Guide
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns off.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each other
(within 3 feet / 1 meter).
2) Press and hold the Power Button for 3 seconds to bring the headphones into pairing
mode with the LED indicator ashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth® connections.
4) Find“TaoTronics TT-BH047”in the search results. Tap on the name to connect. Once
connected, the LED indicator will ash blue once every 3 seconds.
Note:
·The Bluetooth® headphones can remember previously paired devices. If you have previously
paired the headphones with a device, simply turn on your device and the headphones, they
will connect to the last connected device automatically without going into pairing mode.
·To clear pairing history, press and hold the Power and Volume - Buttons simultaneously
until the LED indicator ashes purple. Then restart the headphones to start pairing.
Control Functions
Function
Power on / off
Play / Pause / Answer /
Hang up phone calls
Reject phone calls
Redial
Volume + / -
Previous / Next Track
Operation
Press and hold the Power Button until the LED
indicator ashes / turns off.
Press the Power Button once.
Press and hold the Power Button for 3 seconds.
Press the Power Button twice.
Press the Volume + / - Button
Press and hold the Volume - / + Button
01/02
Note:
·A voice prompt will be heard when the headphones are powered on / off.
·Automatically shuts off after 10 minutes when no device is connected.
·Switch the ANC Button from OFF to ANC to activate the noise cancellation function.
To Next Page
Loading...
Need help?
General
