Need help?Do you have a question about the TapeTech Gooseneck 85T and is the answer not in the manual?
The TapeTech Gooseneck, Model 85T, is a specialized accessory designed for professional drywall finishing, specifically for use with the EasyClean® Pump to facilitate the filling of automatic tapers. This operation and maintenance guide provides essential information for its effective use and upkeep, ensuring that professionals can work "Better – Faster – Every time."
The primary function of the TapeTech Gooseneck (Model 85T) is to create a secure and efficient connection between the EasyClean® Pump and an automatic taper, enabling the transfer of joint compound. It acts as a conduit, guiding the compound from the pump into the taper, which is a critical step in the drywall finishing process. The design ensures a leak-free connection, which is paramount for maintaining a clean work environment and preventing material waste. The Gooseneck is an integral part of a system that streamlines the application of joint compound, contributing to increased productivity and a higher quality finish in drywall projects.
While the manual does not list specific dimensions or material compositions, it highlights key components and their roles in the Gooseneck's functionality. The device features a "FLANGE" for attachment, a "YOKE" which likely refers to a structural support or connection point, and an "OUTLET WITH O-RING SEAL." The O-ring seal is a critical technical detail, indicating a design choice focused on preventing leaks and ensuring a tight, reliable connection during operation. The Gooseneck is designed to integrate seamlessly with the EasyClean® Pump, specifically utilizing the EasyClean® Pump gasket (#700049) for its attachment. This gasket, along with the protruding studs on the pump housing and hex nuts, forms the secure connection. The model number, 85T, serves as a unique identifier for this specific Gooseneck variant within the TapeTech product line. The manufacturing details provided for TapeTech (1380 Beverage Drive, Suite W, Stone Mountain, GA 30083, with contact numbers 1-800-426-6256 and 770-243-2323) underscore the product's origin and support infrastructure. The copyright information indicates that the manual was updated in April 2012 and is ©2012 TapeTech Tool Co., with all rights reserved, suggesting a mature and established product.
The Gooseneck's usage is straightforward and designed for ease of integration into the drywall finishing workflow. To attach the Gooseneck to the EasyClean® Pump, the EasyClean® Pump gasket (#700049) is first placed over the protruding studs on the pump housing. Following this, the Gooseneck is set over these same studs. The connection is then secured by tightening hex nuts firmly. This multi-step attachment process, involving a gasket and hex nuts, is a key usage feature that emphasizes the importance of a tight, leak-proof seal. The instruction to "tighten the hex nuts firmly to prevent leakage" directly addresses a common concern in fluid transfer systems and highlights the design's intent to minimize mess and material loss. The Gooseneck's role is specifically to fill automatic tapers, indicating its specialized application within the broader range of drywall tools. Its design is optimized for this particular task, ensuring efficient and controlled delivery of joint compound. The simplicity of its attachment and detachment process contributes to its user-friendliness in a professional setting where time and efficiency are crucial.
Maintenance of the TapeTech Gooseneck is simple yet crucial for its longevity and continued optimal performance. The primary maintenance steps involve thorough cleaning and lubrication. After use, the Gooseneck should be removed from the EasyClean® Pump. The cleaning process requires the use of a brush and water, or even a water hose, to effectively remove all traces of joint compound from the tool. This thorough cleaning prevents the compound from drying and hardening within the Gooseneck, which could impede its function or cause blockages. Once the tool is clean and free of compound residue, it is essential to lightly oil it. The manual specifically recommends using Ames® Bazooka® Oil or any light machine oil for lubrication. This lubrication step is vital for protecting the metal components from corrosion, ensuring smooth operation, and extending the lifespan of the Gooseneck. Regular maintenance, as outlined, helps preserve the integrity of the O-ring seal and other components, ensuring that the Gooseneck continues to provide a reliable, leak-free connection for filling automatic tapers. The emphasis on cleaning and oiling reflects a practical approach to tool care, acknowledging the corrosive and adhesive nature of joint compound.
To Next Page
General