Tartan Marine TARTAN 3500 User Manual

Description of the single unit fiberglass molding, its materials and construction.

Defines terms like 'standing rigging', 'stays', and 'shrouds' and explains mast support principles.

Discusses mast section design, spreader systems, and aerodynamic efficiency.

Provides step-by-step instructions for tuning the mast and rigging while the boat is at the dock.

Details the process of fine-tuning the rig and mast tension while sailing.

Directs users to the engine owner's manual for specifications and operational details.

Explains the reduction and reverse gears and mentions maintenance and shifting procedures.

Provides a procedure for checking and correcting propeller shaft alignment using a feeler gauge.

Explains the location and maintenance of the stuffing box, including leak adjustment procedures.

Discusses fixed and folding propellers, their locking positions, and feathering propellers.

Provides a step-by-step guide for starting and operating the yacht's engine.

Details the correct procedure for shutting down the yacht's engine safely.

Explains the battery system, including switch positions and recommended battery types.

Details how engine and house batteries are charged via alternator and inverter/charger.

States the requirement for one life jacket per crew member, specifying approved types.

Warns against sanding the bottom gelcoat and advises on bottom painting procedures.

Covers inspection and maintenance of standing rigging for wear and potential failure.

Refers users to the engine owner's manual for comprehensive engine maintenance information.

Provides detailed instructions and safety precautions for stepping the mast and rigging.

Details how to winterize the fresh water system using antifreeze and ensuring the tank is sealed.

Covers engine oil change, filter cleaning, fuel system prep, and fuel stabilizer for winter.