Need help?Do you have a question about the Tascam US-16X08 and is the answer not in the manual?
General| Signal-to-Noise Ratio (SNR) | 100 dB |
|---|---|
| Total Harmonic Distortion (THD) | 0.008 % |
| Audio quality | 16 bit |
Weight and Dimensions| Weight | 2800 g |
|---|---|
| Dimensions (WxDxH) | 445 x 219 x 59 mm |
Lists the main features and capabilities of the TASCAM US-16x08 audio interface.
Explains the typographical and symbolic conventions used throughout the manual for clarity.
Details the components and controls located on the front panel of the TASCAM US-16x08.
Describes the connectors and controls found on the rear panel of the TASCAM US-16x08 unit.
Outlines the necessary hardware and software specifications for Windows, Mac OS X, and iOS devices.
Lists the supported audio driver types for Windows and Mac operating systems.
Provides instructions for installing the necessary driver and Settings Panel software for the unit.
Step-by-step guide for installing the driver and Settings Panel on Windows operating systems.
Instructions for installing the Settings Panel software on macOS for advanced functionality.
Explains how to handle macOS Gatekeeper security warnings during software installation.
Details how to adjust macOS Gatekeeper settings to allow software installation.
Provides procedures for removing the installed driver and Settings Panel software from Windows and Mac.
Explains how to configure the Settings Panel to launch automatically on system startup.
Step-by-step guide for attaching rackmount angles for installation in a rack.
Instructions on how to connect the AC adapter and power supply to the unit.
Illustrates common connection setups for various audio devices like microphones, keyboards, and speakers.
Details how to connect the unit to a computer via USB for audio data transfer.
Explains how to connect microphones, guitars, and other audio equipment for input and output.
Specific guidance on connecting dynamic and condenser microphones, including phantom power.
Instructions for connecting a guitar or bass directly to the unit's instrument inputs.
How to connect various electronic instruments and audio gear to line inputs.
Information on connecting analog record players, requiring a phono amp or equalizer.
How to connect powered speakers or amplifier systems to the unit's line outputs.
Instructions for connecting headphones to the unit's dedicated headphone jack.
Guidance on connecting MIDI devices like keyboards and drum machines to the unit.
How to connect Apple iOS devices to the unit using a Lightning to USB adapter.
Describes how to launch the TASCAM Settings Panel on Windows and Mac OS X.
Overview of the three main pages (MIXER, INTERFACE, OUTPUT SETTING) within the Settings Panel.
Details all controls and functions within the MIXER page, including EQ, Compressor, Faders, and LINK buttons.
Describes the INTERFACE page, showing unit status, firmware, and sample rate.
Explains how to adjust the buffer size for latency control on Windows.
Details the OUTPUT SETTING page for checking and selecting signal routing for line outputs.
Explains the functions of the View and SceneMemory menus in the Settings Panel.
How to reset all Settings Panel parameters to their factory default values.
How to save, load, and rename scene memories to store and recall Settings Panel configurations.
How to reset all saved scene memories to their initial state.
Steps to rename existing scene memories for better organization.
How to operate the unit as a standalone mic preamp without a computer connection.
Details the fixed input-to-output channel routing when the unit is in mic preamp mode.
Instructions for configuring Windows Media Player to use the TASCAM US-16x08 as the default audio device.
How to set up iTunes and macOS to use the TASCAM US-16x08 for audio output.
Information on connecting and using the unit with Apple iOS devices.
A chart detailing MIDI messages transmitted, recognized, and their remarks.
Provides solutions for common issues encountered when using the unit.
Offers methods to reduce computer processing load and resolve audio glitches.
Steps to troubleshoot issues when the unit's driver installation fails or is not recognized.
Lists technical ratings such as sampling frequencies and quantization bit depth.
Detailed specifications for all analog input channels, including impedance and levels.
Detailed specifications for analog line and headphone outputs.
Specifications for MIDI and USB connectors.
Technical specifications for audio performance, including mic amp EIN and frequency response.
Lists system requirements for Windows, Mac OS X, and iOS devices.
General specifications including power, dimensions, weight, and operating temperature.
Provides detailed physical dimensions and diagrams of the unit.
Illustrates the internal signal flow for mic preamp and audio interface modes.
Visual representations of signal levels across various input and output stages.
To Next Page
