ADDENDUM
STARTING PROCEDURE FOR TASKMAN PRESSURE WASHERS FITTED
WITH EASYSTART VALVE
PLEASE ENSURE THAT YOU STAND CLEAR OF THE WATER OUTLET
ON THE PUMP. WATER WILL SPRAY FROM THE PUMP UNTIL THE
VALVE IS CLOSED.
PRIOR TO STARTING ENGINE TURN VALVE TO OPEN POSITION (FIGURE
1)
START ENGINE AS PER ENGINE MANUFACTURERS’ INSTRUCTIONS.
ONCE UNITERRUPTED FLOW OF WATER IS OBSERVED, TURN VALVE
TO CLOSED POSITION (FIGURE 2)
PRESSURE WASHER IS THEN READY TO USE AS PER OWNERS’
MANUAL SUPPLIED WITH MACHINE.
FIGURE 1
FIGURE 2
To Next Page
Loading...