V. CLEANING AND MAINTENANCE
For oil spots on the cooker plate, wipe the cooker plate by
using a soft moist cloth with a little tooth paste or mild
detergent and then use a soft moist cloth to wipe it until no
stain remains.
When product is not in use for a long period of time, disconnect
the power plug from the power outlet and store the induction
cooker away from any dust or bugs.
VI. TROUBLESHOOTING
Abnormalities
Key checking p oints and trouble shooting
After plugging in the power cord and
pressing the “ON/STANDBY” key, the
indicator and display do not light up.
The “ON/STANDBY” indicator lights
up and the display works normally,
but heating does not start.
Heating suddenly stops during the
process.
Is the power plug properly connected?
Is the switch, power outlet, fuse or power cord
damaged?
Is the cookware suitable.
Is the appliance in a “Preset” working status?
For other causes, please take the appliance to a
repairin
g and maintenance site to be fixed.
Is the temperature of the oil too high when frying
dishes?
Is the temperature of the surroundings very high?
Is the air inlet or air outlet of the induction cooker
blocked?
Is the default heating time of the induction cooker
over?
The self-safety protection of the induction cooker
starts, wait for several minutes and connect power
to use it.
Code of failure
E3 E6
Wait a moment and press the “ON/STANDBY” button
when the temperature of the hotplate becomes normal,
the induction hotplate will operate as usual.
E7 E8
Turn off the hotplate, when the voltage becomes
normal, and then turn on the hotplate, it will operate as
usual.
E1 E2 E4
E5 Eb
Please contact the special maintenance department.
Emergency
During using, if there are some abnormal cases, please unplug immediately and
disconnect power.
For any failure of the product, please contact the special maintenance department
or the customer service center.
13
Troubleshooting
To Next Page
Loading...
Need help?
General
