4
V42EMGI-E01_HDMI+DVI 8/11/2006 2:27:18 PM
CONNECTING
Observe the following instructions to connect your LCD display properly:
POWER SUPPLY
• Do not open the power supply housing. An open housing
presents a lethal hazard from electrical shock. There are no
parts inside to be cleaned or serviced.
• Operate your LCD display only with grounded outlets with AC 100-240V~/ 50-60
Hz. If you are not sure about the power supply at your location, check with your
power company.
• Use only the power supply and power connection cable provided.
• For additional safety we recommend use of a surge protector to protect your
LCD display from damage resulting from voltage surges or lightning.
• To remove the LCD display from the power supply, disconnect the plug from
the AC outlet.
• The power outlet must be in the vicinity of your LCD display and within reach
of the power cables. DO NOT stretch the power cables tightly to reach a
power outlet.
• You should arrange the LCD display cables in a manner that no one can trip
over or step on them.
• To avoid damage of cable do not place any objects or furniture on the
cable.
To Next Page
Loading...
Need help?
General
