Need help?Do you have a question about the Taurus Alpatec AC 260 KT and is the answer not in the manual?
Ensures safe usage by children aged 8+, prohibits playing, and mandates supervision for maintenance.
Requires 50cm space from walls and obstacles for proper ventilation and operation.
Verify mains voltage, use a 10A earth socket, and ensure plug fit. Do not alter plug.
Unroll cable, check switch, use handle to move, avoid tilting, unplug when not in use.
Store out of reach of children, avoid extreme temperatures, keep dry and dust-free.
Remove packaging, respect safety distances, ensure appliance is level and stable.
Ensure 50cm clearance for openings/sides, keep plug accessible for emergency disconnection.
Situate for highest efficiency where atmospheric temperature is between 12-32°C.
Lengthen hose, connect to exhaust connector. Use provided pipe; avoid other materials.
Partially open window, fix window kit. Compatible with most normal windows.
Unroll cable, connect to mains, press ON/OFF. Unit enters cooling mode with low fan speed.
Press mode button for cooling, dehumidifying, or fan modes.
Select high, mid, or low fan speed under cooling and fan modes.
Set time start (0-24h) in standby, set time switch-off (0-24h) in startup.
Press button to control the movement of the louver (up/down swing).
Adjust temperature 17-30°C (1°C increments). Select fan speed: high, mid, low.
Press Speed for 5s for internal dry function (both fans). Press again to cancel.
Select mode, remove drain plug, use tube for drainage. Compressor starts if room >=15°C.
Select auto mode; unit runs cooling if temp >25°C, fan only if temp <25°C.
Compressor starts 3 minutes after power on or restart to protect it.
Unit alerts when water level is high. Discharge water as per chapter 'water drainage'.
Pull plug to drain water when tank is full. Restart machine after drainage.
Self-evaporative function in cooling mode enhances cooling effect. Avoid continuous drainage.
Disconnect, cool, clean with damp cloth. Do not immerse in water or use solvents.
Clean filters every 2 weeks by washing in warm water with detergent, then drying.
Drain water, set to fan mode for half day to dry interior, then unplug.
Coil wire, bind, store pipe, bag unit. Keep remote batteries separate.
Table lists issues like no power, poor performance, noise, compressor not working, with causes and solutions.
Explains error codes E1 (coil sensor), E2 (indoor sensor), E4 (anti-freeze protection).
Packaging is recyclable. Product contains no harmful environmental substances.
Symbol indicates disposal via authorized waste agent for WEEE selective collection.
Ensures safe usage by children aged 8+, prohibits playing, and mandates supervision for maintenance.
Requires 50cm space from walls and obstacles for proper ventilation and operation.
Verify mains voltage, use a 10A earth socket, and ensure plug fit. Do not alter plug.
Unroll cable, check switch, use handle to move, avoid tilting, unplug when not in use.
Store out of reach of children, avoid extreme temperatures, keep dry and dust-free.
Remove packaging, respect safety distances, ensure appliance is level and stable.
Ensure 50cm clearance for openings/sides, keep plug accessible for emergency disconnection.
Situate for highest efficiency where atmospheric temperature is between 12-32°C.
Lengthen hose, connect to exhaust connector. Use provided pipe; avoid other materials.
Partially open window, fix window kit. Compatible with most normal windows.
Unroll cable, connect to mains, press ON/OFF. Unit enters cooling mode with low fan speed.
Press mode button for cooling, dehumidifying, or fan modes.
Select high, mid, or low fan speed under cooling and fan modes.
Set time start (0-24h) in standby, set time switch-off (0-24h) in startup.
Press button to control the movement of the louver (up/down swing).
Adjust temperature 17-30°C (1°C increments). Select fan speed: high, mid, low.
Press Speed for 5s for internal dry function (both fans). Press again to cancel.
Select mode, remove drain plug, use tube for drainage. Compressor starts if room >=15°C.
Select auto mode; unit runs cooling if temp >25°C, fan only if temp <25°C.
Compressor starts 3 minutes after power on or restart to protect it.
Unit alerts when water level is high. Discharge water as per chapter 'water drainage'.
Pull plug to drain water when tank is full. Restart machine after drainage.
Self-evaporative function in cooling mode enhances cooling effect. Avoid continuous drainage.
Disconnect, cool, clean with damp cloth. Do not immerse in water or use solvents.
Clean filters every 2 weeks by washing in warm water with detergent, then drying.
Drain water, set to fan mode for half day to dry interior, then unplug.
Coil wire, bind, store pipe, bag unit. Keep remote batteries separate.
Table lists issues like no power, poor performance, noise, compressor not working, with causes and solutions.
Explains error codes E1 (coil sensor), E2 (indoor sensor), E4 (anti-freeze protection).
Packaging is recyclable. Product contains no harmful environmental substances.
Symbol indicates disposal via authorized waste agent for WEEE selective collection.
General| Brand | Taurus Alpatec |
|---|---|
| Model | AC 260 KT |
| Category | Air Conditioner |
| Language | English |
To Next Page
