Taurus Alpatec Babel - Installation; Assembling the Base; Assembling the Battery; Instructions for Use

other work environments.
- This appliance can be used by people
unused to its handling, disabled people
or children if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
- Cleaning and user maintenance shall
not be made by children unless they
are supervised
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- This appliance should be stored out of
reach of children and/or the disabled.
- Never leave the appliance connected
and unattended if is not in use. This
saves energy and prolongs the life of
the appliance.
- Do not use the appliance with pets or
animals.
- Do not use the appliance to dry texti -
les of any kind.
- Any misuse or failure to follow the
instructions for use renders the guaran -
tee and the manufacturer’s liability null
and void.
Installation
- The appliance should be used with its base
Assembling the base:
appliance face down.
- Fix the base using the screws provided (Fig 1).
- Stand the appliance up again so as to check
that the base works properly.
Assembling the battery/s
- Remove the cover of the battery compartment.
- Check that the plastic covering that protects the
battery has been removed (some batteries are
sold with a protective covering)
- Put the battery in its compartment, respecting
the polarity (Fig.2).
- Replace the cover of the battery compartment.
Instructions for use
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
the desired direction.
- Turn the appliance on, by using the on/o button
- Select the desired speed.
-
sable to start o from the lowest speed position
and, once the fan has been switched on, progres -
sively increase the speed to the desired position.
Timer function (BABEL):
- The appliance’s operating time can be contro -
lled.
- To program the operating time simply select it
using the (C) knob.
Timer function (BABEL RC):
- The appliance’s operating time can be controlled.
- To program the operating time simply select it
using the (E) control button.
- The fan is equipped with a timer that allows you
to set its length of operation from 0,5h to 7,5h.
Oscillation function:
- The oscillation function makes it possible to
-
matically alternates over a range of 70º
- To activate this function, press the (B) button
- To deactivate this function, follow the procedure
for switching it on in reverse.
- Stop the appliance, selecting position 0 on the
selector control.
- Unplug the appliance from the mains.
Carry handle/s:
- This appliance has a handle on the upper part
of the body, which facilitates comfortable trans -
portation (Fig. 3).